Fluid-structure Interaction Effects Research Articles

Analysis of blade noise with different root boundary conditions considering fluid-structure interaction effect

It is of certain importance for noise reduction to investigate the relationship between the aeroacoustic characteristics of blade and root boundary conditions when considering the fluid-structure interaction (FSI) effect. In this study, a set of precise dynamic models and two-way FSI calculation methods are developed to predict the dynamic load and response of blades more accurately. The natural frequency inaccuracy of the blade model is kept within 5% by comparing the results of the modal test using the ploy-reference time domain method and adopting the sensitivity analysis method with the blade beam stiffness as the modification parameter. Besides, based on the numerical results from the computational fluid dynamics method considering the FSI effect, the aeroacoustic characteristics of blades with different root boundary conditions are analyzed by adopting the Ffowcs Williams-Hawkings equations. The aeroacoustic characteristics of the NACA blade in hover are thoroughly discussed, with emphasis on the impact of different root boundary conditions on rotation noise. The result demonstrates that, the sound pressure level (SPL) difference of loading noise can reach 1.4 dB between blades with various root boundary conditions, while the SPL difference of thickness is only 0.4 dB.

Bandgap analysis of periodic composite plates considering fluid–structure coupling

This article presents a novel approach for predicting vibration bandgaps in periodic composite plates with fluid–structure interaction (FSI) using a unit cell-based finite element model. The novelty of our approach lies in the formulation of a fluid-induced added mass matrix, which integrates the Bloch periodic boundary condition, allowing for the incorporation of the fluid’s inertial effect in the context of unit cell-based bandgap analysis. We therefore construct a unit cell model comprising a composite Mindlin plate which integrates periodic FSI effects with the simultaneous application of Bloch conditions on both the structure and the fluid domains. Subsequently, we studied a set of periodic composite plates with FSI effects on one or both sides, thereby assessing the influence of the fluid properties such as density and the fluid domain dimension on the structure vibration. The bandgap prediction is compared with the frequency response simulations which involve diversified microstructure designs. The obtained results provide indications regarding the effectiveness and applicability of the proposed numerical methodology.

A CFD-FEA coupled model for simulating dynamic response of offshore jacket platform under earthquake considering wind, wave, current and aftershock loads

Offshore platforms as the key equipment in marine oil and gas exploitation are facing challenges from various environmental conditions, such as winds, waves, currents and even earthquakes. Due to the combined action of those concurrent loads, there is potential risk of accidents. The aim of this paper is to systematically study the dynamic response and safety assessment of the large scaled offshore structures against the concurrent loads considering the fluid-structure interaction (FSI) effects. Three-dimensional numerical wave flume including a jacket platform is established by CFD software Fluent, based on which the simulation of wave generation and propagation is carried out. Then the FSI effects between waves and platform are analyzed using the CFD- FEA coupling method. Subsequently, the seismic ground accelerations are inputted into the platform, correspondingly the structural response is analyzed. Moreover, multiple influencing factors including earthquake direction and mainshock-aftershock sequence are discussed. The results show that the structure response under concurrent loads is not a simple linear superposition of different load. The seismic response would be underestimated if wave action is ignored when the earthquake acts on certain angles. The methodology proposed could be regarded as an effective way to analyze the FSI problem under realistic offshore environment.

Active vibration control of fluid-conveying pipelines: Theoretical and experimental studies

For the fluid-conveying pipeline with macro-fiber composites (MFC), relevant dynamic modeling and experimental testing studies are rarely found in previous papers. Therefore, this paper has carried out related research work. Firstly, considering the fluid-structure interaction and piezoelectric effects, a semi-analytical modeling method for the fluid-conveying pipeline with MFC attaching to any position is proposed. A new Runge-Kutta-Gear (RKG) time-domain solution method is presented for solving state-space equations with the characteristics of rigid equations, and the design methods of Linear-Quadratic Regulator (LQR) controller and Proportional-Integral-Derivative (PID) controller are introduced, respectively. Secondly, an experimental system for active control and vibration test is built, and the dynamic model and control method are verified by experiments and simulations. Finally, the influence of relevant control parameters in the controller on the active control effect is discussed, and the influence law of fluid parameters such as fluid velocity and fluid pressure on the active control is also clarified. The novelty of this work is that the active vibration control and solution methods for the fluid-conveying pipeline with MFC are proposed, and the feasibility of MFC for pipeline vibration suppression is verified by experiments, which provides a new technical idea for the vibration reduction design of the fluid-conveying pipeline.

Thermal effect on the modal characteristics of the rotor of a typical cryogenic turbine for helium refrigerator

The helium turbine is a critical component of the cryogenic system for nuclear fusion devices. To ensure the turbine's steady functioning and avoid resonance, it is essential to understand and clarify the influence of key factors on its modal characteristics. This paper investigates the influence of thermal effect, fluid-structure interaction and rotational effects on the intrinsic frequency of a helium turbine used in the Comprehensive Research Facility for Fusion Technology (CRAFT) cryogenic system. The effects of coefficient of thermal expansion, thermal conductivity and Young's modulus on the intrinsic frequency of the rotor are explored, considering these thermal factors that vary with temperature. The results indicate that thermal effect has the greatest influence on the intrinsic frequency of the rotor over rotational effectand fluid-structure interaction. Lower-order modes are more sensitive to changes in thermal conductivity, while higher-order modes are more sensitive to changes in Young's modulus at low temperatures. The intrinsic frequency of the rotor is more sensitive to changes in the thermal factors of the shaft rather than the thermal factors of the impellers.

Investigations on seismic performance of nuclear power plants equipped with an optimal BIS-TMDI considering FSI effects

This paper introduces a base isolation system-tuned mass damper inerter (BIS-TMDI) hybrid system to the AP1000 nuclear power plant (NPP), which reduces seismic damage potential of the NPP structure. The effects of fluid-structure interaction (FSI) caused by the passive containment cooling system water storage tank (PCCWST) on NPP's seismic performance are investigated. The FSI of water tank theoretical model is considered based on the Housner's model, and a series of time history analyses are performed to prove the rationality of the proposed model. Three single-objective optimization strategies are employed to minimize the relative displacement variance and absolute acceleration variance of the upper structure, as well as the filtered energy index (FEI). Furthermore, a multi-objective optimization strategy considering all these three indexes is proposed to obtain optimal parameters of vibration control. The influence of vibration control strategies on the relative deformation and acceleration of the upper structure is explored with various water level ratios. The analytical results indicate that the proposed BIS-TMDI strategy has significantly reduced the NPP structure's seismic response. The effectiveness of the vibration control strategy is influenced by the water level ratio, emphasizing the significance of designing an appropriate water level ratio to reduce NPP structure's seismic response.

Numerical analysis of sodium-argon two-phase flow in narrow channels under severe accident conditions in pool type SFR

A two-phase flow model for sodium-argon mixture flow through the reactor vessel head penetrations under the energetic core disruptive accident in a sodium fast reactor (SFR) is presented. The model evaluates the total sodium mass in sodium-argon mixture released to the reactor containment building (RCB) through penetrations. The driving pressure at the penetration entrance is given as input. The two-phase frictional and local pressure drops, inertial and piezo-metric heads are accounted for in the model. Depending on the argon volume fraction, either a homogenous or separated flow approach is adopted to evaluate the mixture flow. Reactor-scale analysis show that the presence of argon in vessel head penetrations can significantly mitigate the total sodium release mass during the slug impact phase. Also, the two-phase frictional pressure drop plays a mitigating role and needs to be included in the model formulation to avoid overestimation of the sodium release mass. Fluid-structure interaction effects such as vessel head bending and hold-down bolt elongation have negligible influence on sodium release mass as long as the deformations are within the elastic limit. The model is conceived to be part of an integrated code system to evaluate the sodium fire and the maximum RCB pressure under severe accident conditions in a pool-type SFR.

Dynamics analysis of a rigid-flexible-liquid coupled satellite antenna system via absolute nodal coordinate formulation curvature continuity constraints

Typically, Euler and Lagrangian approaches are primarily used in fluid dynamics and multibody system (MBS) dynamics models, respectively. Absolute nodal coordinate formulation (ANCF), as a Lagrangian nonlinear finite element method (FEM), can effectively handle large deformation problems and incorporate the arbitrary Lagrange-Eulerian (ALE) method for fluids turbulence and breaking. Therefore, we have established a rigid-flexible-liquid coupled satellite antenna system dynamics model via ANCF. Navier-Stokes equations and virtual work principle are applied to formulate the fluid-structure interaction (FSI) dynamics equations. A penalty function is used to describe liquid incompressibility. Bi-directional FSI effects are solved simultaneously and brick fluid element elastic force is validated with reference experiments. Moreover, we introduce curvature continuity constraints to make the liquid free surface continuous. Results indicate that curvature continuity constraints can smoother liquid free surface and eliminate the protrusions and depressions caused by assembling brick fluid elements. Furthermore, we achieve simulation results consistent with reference experiments by using fewer elements with curvature continuity constraints. In addition, due to bi-directional FSI effects, liquid sloshing will magnify satellite antenna vibrations and simultaneously oscillate the advancing tank.

Simplified earthquake response analysis of rectangular liquid storage tanks considering fluid-structure interactions

A simplified model of a rectangular liquid storage tank is proposed to estimate the earthquake responses of the system while considering the effects of fluid-structure interactions. The complicated three-dimensional structural behavior of a rectangular tank is represented by the simple combination of the fundamental modes of a rectangular-ring-shaped frame structure and a cantilever beam. The governing equation for the system is derived from Lagrange’s equation. The earthquake responses of deflection, hydrodynamic pressure and its resultant force and moment, base shear and overturning moment due to the structural deformation are obtained from the solution of the governing equation. The effective masses of the system and their heights are presented with the effective added masses and their heights from the hydrodynamic effects. The total earthquake responses are obtained with the convective earthquake responses taken into consideration. The proposed simplified model is applied to example rectangular liquid storage tanks with various aspect ratios, and the accuracy of the model is demonstrated. The proposed simplified model can be employed for the seismic design of a rectangular liquid storage tank, and reliable estimations for earthquake responses of the considered fluid-structure interaction system are obtained without sophisticated and/or complicated dynamic analysis.

Dynamic response of composite materials subjected to low velocity impacts in water: A numerical study

The damage tolerant design of marine composite structures for impacts is dependent on empirical data to ensure continuing seaworthiness. Impact studies on composite laminates are typically performed according to ASTM D7136 which was originally developed by the aerospace industry. The marine operating environment, however, is vastly different. Impact characterisation and damage prediction of underwater composite structures is hindered by the limited understanding on the effects of fluid-structure interaction of a surrounding water medium with the composite structure and impactor. A coupled Eulerian-Lagrangian (CEL) numerical model is presented in this work with the aim of advancing fundamental understanding of the effects of a fluid on the transient dynamic response of composite plates subjected to foreign body impact. The added mass effect of the water increased the peak impact force while reducing the free vibration frequency and peak displacement. The virtual added mass factor also reduced significantly with increasing laminate thickness. This work will pave the way in improving the damage tolerant design of underwater composite structures as will computationally efficient methods of simulating such events.

Analysis of fluid structure interaction between fuel elements and the coolant in Xi’an Pulsed Reactor core under seismic conditions

The phenomenon of fluid structure interaction exists widely in nuclear facilities, and it is of great significance to the safety of nuclear facilities. Xi’an Pulsed Reactor (XAPR) is a pool research reactor with good inherent safety. It has been operating safely since the loading criticality. However, researches on fluid structure interaction have not yet been carried out on Xi’an Pulsed Reactor which was built in the 1990s because of the limitation by the technical conditions and safety evaluation range at that time. In order to fill the technical blank mentioned above, the fluid structure interaction between fuel elements and the coolant in Xi’an Pulsed Reactor core is simulated by finite element method for the first time. In this method, the interaction between solid component deformation and flow field is considered alternatively, and some results are obtained. The maximum value of the deformation of fuel elements cladding tube do not exceed 0.1 mm, and the equivalent von-Mises stress is about 4.4683 × 107 Pa under given conditions, which is less than the tensile strength and yield strength of the material. The results show that the fluid structure interaction effect between fuel elements and the coolant in Xi’an Pulsed Reactor core is very weak under the given seismic conditions, and thus will not affect the safety of the reactor core and can be ignored.

Fluid-structure interaction simulation for multi-body flexible morphing structures

The multi-body flexible morphing airfoil can improve the aerodynamic characteristics based on different flight missions continuously. Recently researches have focused on the unsteady aerodynamic characteristics of flexible wings under passive actuation. However, the unsteady aerodynamic characteristics with the fluid–structure interaction effects in the multi-body active actuation process of morphing airfoil deserve further investigation. In this paper, a fluid–structure coupled simulation method for multi-body flexible morphing airfoil with active actuation subsystem was investigated, and the aerodynamic characteristics during deformation were compared with different skin flexibility, flow field environment, actuation mode and actuation time. The numerical results show that for the steady aerodynamic, the skin flexibility can improve the stability efficiency. In the unsteady process, the change trend of the transient lift coefficient and pitching moment are consistent with those of the active drive characteristics, while the instantaneous lift-drag ratio coefficient is greatly affected by the driving mode and can be improved by increasing the driving duration.

Seismic experiments on short coaxial multi-layered cylindrical shells with fluid–structure interaction in fast reactors

As the most important component of pool-type fast reactors, the main vessel contains most of the equipment for the primary circuit and thousands of tons of liquid sodium. The fluid–structure interaction effects of the coaxial multi-layer thin-walled cylindrical shells formed by the main vessel and its thermal shield cannot be neglected. Though the research on the fluid–structure interaction of the liquid in the pool is sufficient, the research on the short coaxial multi-layer cylindrical shells is not enough, especially the axial and circumferential mode shapes and the ratio of each mode under seismic conditions. So, it is necessary to study the fluid–structure interaction of short coaxial multilayer shells. This paper presents shaking table tests performed on double- and triple-layered cylindrical shells to investigate fluid–structure interaction and seismic response, respectively. The experiments reveal that when the aspect ratio is less than 2, Mode (1,6) exhibits the most significant response under sine wave excitation conditions, while Mode (1,1) demonstrates the highest response under seismic conditions. The first three modes are characterized as out-of-phase modes. Additionally, the pressure component of the first circumferential mode contributes 20% to the overall response of the first 12 modes under seismic conditions.

Numerical study on the behaviors of coastal bridges with box girder under the action of extreme waves

This study presents an in-depth investigation of the wave-girder interaction by considering the Fluid-Structure Interaction (FSI) effect. Firstly, a 2D FSI model is developed based on the overset mesh method. The model's validity is confirmed through comparisons with analytical wave surface and relevant experimental data. Subsequently, the model is employed to examine the girder behaviors under extreme wave action, including wave forces on the girder, dynamic response, and forces on bridge bearings. Moreover, parametric studies are carried out to assess how variations in girder dimensions affect the girder's behaviors. The numerical results indicate that the girder dynamic response effectively reduces the maximum wave forces on the girder, but simultaneously increases the horizontal bearing force. During the extreme wave action process, the seaward bearing experiences both tension and compression forces, whereas the landward bearing experiences only compression force. The deck thickness of the girder significantly influences its behaviors, necessitating an optimization design to minimize the failure risk of coastal bridges. This study provides valuable insights into the behaviors of coastal bridges under extreme wave conditions and offers references for designing and enhancing coastal bridges.

Deep learning-based analysis to identify fluid-structure interaction effects during the response of blast-loaded plates

Blast events within urban areas in recent decades necessitate that protective design is no longer reserved for military installations. Modern civil infrastructure composed of light-weight, flexible materials has introduced the consideration of fluid-structure interaction (FSI) effects in blast-resistant design. While the action of blast loading on massive, rigid structures in military fortifications is well established, assessment of FSI effects is, at present, only possible through computationally expensive coupled simulations. In this study, a data-driven approach is proposed to assist in the identification of the blast-loading scenarios for which FSI effects play a significant role. A series of feed-forward deep neural networks (DNNs) were designed to learn weighted associations between characteristics of uncoupled simulations and a correction factor determined by the out-of-plane displacement arising from FSI effects in corresponding coupled simulations. The DNNs were trained, validated and tested on simulation results of various blast-loading conditions and material parameters for metallic target plates. DNNs exposed to mass-per-unit-area, identified as an influential factor in quantifying FSI effects, generalised well across a range of unseen data. The explainability approach was used to highlight the driving parameters of FSI effect predictions which further evidenced the findings. The ability to provide quick assessments of FSI influence may serve to identify opportunities to exploit FSI effects for improved structural integrity of light-weight protective structures where the use of uncoupled numerical models is currently limited.

Effect of fluid–structure interaction on the underwater blast response and failure of composite panels

With the increasing application of typical composite structures in ocean engineering, underwater blasts have begun to be a focus for the complexity of the fluid–structure interaction (FSI) effects. In this research, the dynamic responses and failure of composite laminated and sandwich panels subjected to an underwater blast were analyzed. The influence of the FSI on the response process and failure characteristics was studied numerically to gain insight into the dynamic failure mechanism. Different failure evolution forms were found, and each failure characteristic was closely correlated with FSI effects due to the respective mechanism. Additionally, based on Hamilton’s principle, a one-dimensional theoretical model considering the equivalent stiffness of plate as elastic foundation was established to predict the response process. Through comparison with the results obtained from similar set-up numerical model, the validity of the energy balance model is discussed. The work of this research laid a foundation for the application of composite panels in underwater protection.

A multiphysics model for fluid-structure-electrophysiology interaction in rowing propulsion

Jellyfish are one of the earliest example of animal that actively regulate swimming, but the mechanisms governing the locomotion are still a matter of research. Jellyfish obtain locomotion by activating the subumbrellar muscle layer. Sensory inputs trigger the contraction of the bell and the fluid-structure interaction effects driving locomotion. These have been extensively studied, whereas a representation of the full neuro-mechanical locomotion chain, with focus on the actuation-locomotion dynamics, has not been proposed yet. A model of such a complex multi-physical phenomenon would be informative for several purposes, ranging from the comprehension of behavioral aspects to the design of soft actuators and bio-inspired devices. In this regard, we propose a computational framework to address the coupled electrophysiological, elastic, and fluid aspects of the locomotion of the Scyphozoan group. This relies on the sequential coupling of segregated solvers, such that each sub-problem can be addressed with the most computationally effective technique. The spatial discretization is addressed by isogeometric analysis for the electrophysiological and elastic sub-problems, and by finite differences for the fluid sub-problem. The active strain approach allows to distribute the active contraction of radial and coronal muscle fibers following the biological architecture.The inherent multi-scale nature of the model is addressed by means of a nested grid approach and multiple time-advancement lines. In view of a reasonable computational effort, we enforce the hypothesis of axial symmetry limiting the number of degrees of freedom used in the simulations. The effectiveness of the scheme employed for each sub-problem is verified against different test-cases of engineering and biologic inspiration. Finally, we carry out an extensive comparison between the simulation output and the in-vivo measurements on a 3-cm specimen of Aurelia Aurita.

Influence of seismic isolation on the earthquake response of internal components in a fast reactor

Nuclear energy is being considered as a frontrunner towards achieving the zero carbon goal. A sustainable use of nuclear energy is possible when a reactor design is deployed across regions with varying seismic hazard. Seismic isolation technology has been proven to reduce earthquake loads in the structures, and is being seen as a key towards the standardized reactor designs. This paper investigates the influence of seismic isolation on the response of a generic fast reactor (GFR) similar to the prototype fast breeder reactor (PFBR) currently under commissioning at Kalpakkam, India. This reactor comprises a head-supported main vessel that houses other reactor components (e.g., core, inner vessel). The major vessels of the reactor are partially filled with liquid sodium. In order to understand the influence of seismic isolation, simplified lumped mass stick models (LMSMs) for the GFR components were developed. These models were based on static analysis results obtained using corresponding finite element (FE) models. The component models were assembled to generate the LMSM and FE model for the GFR. The LMSM was verified through the comparison of dynamic properties obtained using the FE model, and through the comparison of response-history analysis results. These models considered fluid masses lumped at respective shells, thereby ignoring the fluid–structure interaction (FSI) effects. A representative system was analyzed with and without considering FSI effects. These effects did not influence acceleration response significantly. Fixed-base (FB) and isolated base (IB) configurations of the LMSM for the GFR were subjected to a series of response-history analyses. Seismic isolation led to a substantial reduction (e.g., up to 10 times) in the median floor accelerations, particularly for lower sliding friction and longer sliding period. The floor spectral ordinates for the IB configuration of GFR subjected to 1.00 g shaking were less than that for the FB configuration of GFR subjected to 0.25 g shaking at most periods, suggesting that the PFBR can be deployed at locations with seismic hazard much greater than that at Kalpakkam if suitable isolation systems are used.

Seismic response analysis of double-trough aqueduct considering fluid-structure interaction effect.

At present, the crude fluid-structure interaction analysis model cannot accurately characterize the interaction mechanism between aqueduct and water under earthquake action. In order to solve this problem, this paper analyzes the seismic response of the double-tank aqueduct under the action of earthquake by using the shaker test and the VOF (Volume of Fluid) method considering the free liquid level from the perspective of fluid-solid bidirectional coupling, explores whether the liquid movement in the double tank is consistent and the shock absorption effect of different water levels on the aqueduct, and analyzes the amplitude of free liquid level sloshing and the change of horizontal dynamic pressure caused by water level change from the generation mechanism of TLD (Liquid tuning dampers). The results show that the liquid movement in the two tanks in the double-channel aqueduct is basically the same under the action of earthquake, and the TLD effect of the liquid gradually increases with the increase of the water level in the aqueduct, and the maximum peak shock absorption rate is 63.4% at the maximum peak and 50.4% in numerical simulation. The shaking amplitude of the liquid is positively correlated with the water level height, and the magnitude of the shaking amplitude also reflects the magnitude of the moving water pressure.

Dynamic Effect of Fluid–Structure Interaction and Modal Analysis of Crude–Pipeline Interaction System Considering the Fluctuating Pressure of Medium

This work explored the fluid–structure interaction (FSI) effect of crude oil and pipeline and the vibration characteristics of the pipe–crude oil structural system. A finite element computational analysis theory and corresponding simulation method were proposed for crude oil pipelines considering the FSI effect. Meanwhile, the spring model of the FSI interface between crude oil and pipeline was proposed. The experimental simulation and neural network were adopted to obtain the flow-excited pulsation pressure (FEPP), and the kinetic equations of the pipe–crude oil FSI were analyzed. The finite element computation (FEC) model for pipe–crude oil bi-directional FSI dynamics was established, which was composed of five support span lengths and four pipe liquid levels and can provide five different crude oil fluid velocities. One hundred orthogonal simulation test conditions were designed. In addition, the displacement response and acceleration response under FSI of the pipe wall were calculated, and the first six orders of inherent frequencies and main vibration patterns of the FEC model were analyzed. The results revealed that the dynamic effect of FSI between the crude oil transport medium and pipeline was complex and was influenced by the length of the pipeline crossing section, medium flow velocity, difference of liquid surface height, and displacement response. The acceleration response possessed prominent vibration decay characteristics, and the response peak in the same condition was about 8.2 times larger than that of the steady-flow state response. Therefore, the effect changed the inherent frequency and vibration pattern of the pipeline, to which the engineering design should pay sufficient attention.